ambrogio robot

A legend in your Garden for over 15 years!

No. Ambrogio Robot will adapt to your garden. You only need to remove stones or any objects on the grass, and fill in any holes in order not to hinder the functionality of Ambrogio Robot.

Multiply the length by the width of your property and compare the result with the measurements given on the Ambrogio Robot technical data sheets. The total surface area should include the house, trees, flower beds and any other features in the area in question. Ambrogio Robot will adapt its operations according to the obstacles present.

Yes. Ambrogio Robot moves effectively over any ground surface, including slopes. Under optimal ground conditions, it can manage gradients up to 55%. The wheels of Ambrogio Robot are designed to increase their grip if the ground is slippery. Please see the operating precautions in the section in the operating manual entitled “Preparation and marking the boundaries of the work areas”.

Yes. Ambrogio Robot cuts any type of grass in residential gardens, even thick or wet grass. Ambrogio Robot can be programmed to work at night or in the early morning so that you can enjoy your garden during the day.

Ambrogio Robot cuts grass autonomously and automatically. It does not require your help or assistance. Every day, Ambrogio Robot cuts a few millimetres of grass and leaves the clippings on the ground, fertilizing your lawn in a natural way.

Ambrogio Robot can manage up to a maximum of 4 working areas: these include the main area where the recharging base is positioned and up to maximum 3 secondary areas corresponding to areas of lawn adjoining the main area. Please see the "Technical information" in the operating manual to check the exact number of areas your Ambrogio Robot can manage.

Please remember that Ambrogio Robot is designed to carry out daily maintenance on your lawn. Ambrogio Robot cuts a height equal to a few millimetres of grass every day, thus contributing to naturally fertilizing and improving the quality of the grass. Please check the maximum cutting height permitted in the section in the operating manual entitled “Technical information”.

No. It is not necessary to collect or dispose of grass clippings. Every day, Ambrogio Robot cuts a few millimetres of grass. The clippings are left on the ground and act as a natural fertilizer for your lawn.

No. When the robot returns to the charging station, no signal is transmitted so as to optimise energy consumption.

Yes. Ambrogio Robot gives a warning when the batteries need to be recharged, and it autonomously returns to the recharging base.

Ambrogio Robot works according to programmed work intervals and alternates cutting cycles with recharging. For even grass cutting, it proceeds and rebounds in the area marked by the boundary wire. To optimize cutting, it adopts a spiral movement where the grass is taller or thicker.

Yes. However, you need to assess whether the lawn mower robot will hit the new obstacle or whether it will be necessary to modify installation to include it in the perimeter. Your local Ambrogio Robot dealer will provide additional wire during installation so that the boundary wire can be quickly adapted to further changes and avoid joins.

Yes. But only if the gardens are adjoining and there are no steps between the two gardens. Ask your local Ambrogio Robot dealer to evaluate this specific case. For communal grass cutting, it is necessary to assess the total surface area of the gardens where Ambrogio Robot will work in order to choose the best Ambrogio Robot version.

Not normally. To avoid any interference, however, it is always advisable to install the recharging base in a position away from automatic gates, power boxes for lighting or automatic irrigation of the garden. Please see the section in the operating manual entitled “Planning of system installation”.

Yes, provided that these objects are over 10cm high. Ambrogio Robot will approach and gently touch an obstacle in order to cut the grass around it. Ambrogio Robot will then proceed to cut in a different direction. Ambrogio Robot will not damage and cannot be damaged.

Yes. Any objects you prefer Ambrogio Robot not to collide with must be surrounded by boundary wire, laid according to the instructions in the section in the operating manual entitled “Preparation and marking the boundaries of the work areas”. Ambrogio Robot will move to the edge of the wire, and then proceed in a different direction.

You must access the programming menu using the controls on the display in order to select the days and the times you want Ambrogio Robot to work. Please see the table of tips in the section in the operating manual entitled “Work schedules – Programming mode”. You can contact your local Ambrogio Robot dealer for further advice.

Yes. Follow the detailed instructions in the operating manual. In any case, your local Ambrogio Robot dealer is at your service if you should need any tips or if you prefer Ambrogio Robot to be directly installed professionally in your garden.

The installation kit is inside the box containing Ambrogio Robot. It includes a reel of perimeter wire, a bag of fixing nails, the recharging base with a power adaptor and electrical socket, and the operating manual.

Ambrogio Robot works in an area marked by a boundary wire positioned around the edge of your garden. The wire is attached to the ground using plastic fixing nails, or it can be buried. The beginning and the end of the wire are connected to the recharging base, which is connected to a power outlet.

Yes. Ambrogio Robot can be protected by a 4-digit PIN code. Ambrogio Robot cannot be started up or its programming menu accessed without the PIN code, therefore third parties cannot use Ambrogio Robot. Please see the section in the operating manual entitled “Safety - Programming mode”.

If there is an electrical power failure, Ambrogio Robot will perceive the absence of the boundary wire. It will stop and wait for the power to be restored so that it can resume its work.

Yes. Ambrogio Robot can cut while it is raining, however, to prevent it from getting too dirty we recommend activating the rain sensors because cutting wet grass may damage the lawn: Ambrogio Robot will return to the recharging base and will wait for the next work cycle. Please see the section in the operating manual entitled “Settings - Programming mode".

Yes. Ambrogio Robot is designed to work at an ambient temperature from -10 to + 50°C, a range that is much wider than the growth rate of grass.

The safety devices will stop Ambrogio Robot from working if it should hit a stone. Check that the blade is not damaged and replace it if necessary. Please see the section in the operating manual entitled “Robot safety stop” and “Blade replacement”. We recommend that you regularly check that no stones or objects have been accidentally left on the lawn.

Yes. Ambrogio Robot comes with a red emergency stop button with the wording “STOP” in an accessible and easily identifiable position. If lifted, Ambrogio Robot and the blade will stop.

Take advantage of the winter to take Ambrogio Robot to your local Ambrogio Robot dealer for its annual maintenance, which is recommended in the warranty booklet. Please see the section in the operating manual entitled “Prolonged inactivity and restarting”, which explains how to store Ambrogio Robot and its recharging base.

The monthly consumption of Ambrogio Robot is considerably less than the fuel consumption required to use a petrol-driven lawn mower. For a medium sized lawn, the electricity costs of Ambrogio are just over 1 euro per month!!

Ambrogio Robot comes with a 4-tooth stainless steel blade that lasts for many years, unlike normal cutters used with lawn mower robots that need to be frequently replaced. Please contact your local Ambrogio Robot dealer to sharpen the blade.

If, after many working cycles, you notice that it is necessary to replace the blade, you can follow the simple instructions in the section in the operating manual entitled “Blade replacement”. In a few minutes, you can make Ambrogio Robot fully operational again. We recommend using only original Ambrogio Robot Ambrogio Robot blades. Please contact your local Ambrogio Robot dealer for the replacement or maintenance of other parts.

The blade and the wheels because they are more exposed to dirt and wear and tear. Check and remove any oxidization from the battery charger knobs and from the recharging base plates of Ambrogio Robot. It will only take a few minutes to ensure complete efficiency for your Ambrogio Robot!

Yes. You need to check Ambrogio Robot regularly and clean it if required. You can see how to do this in the section in the operating manual entitled “Scheduled maintenance table”. Please note that Ambrogio Robot should not be immersed or washed with water. In winter, take Ambrogio Robot to your local Ambrogio Robot dealer for its annual maintenance.

The most common problems that may arise during the normal operation of Ambrogio Robot can be easily identified by consulting the "Troubleshooting" chart in the operating manual. The chart shows the most common problems, causes and tips for possible solutions. You can easily fix some faults, whereas other intervention requires specific technical expertise, therefore we recommend you contact your local Ambrogio Robot dealer, who will promptly restore Ambrogio Robot to its normal operation. We suggest that you read the advice and tips for use in the various sections of the operating manual. In this way, you will avoid any problems due to improper installation or programming.